

Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Japan.
๐ถ Drive Your Sound, Own the Road!
The Pyle PLA2200 is a compact yet powerful 2-channel car amplifier delivering up to 1400 watts of bridgeable output. Featuring gold-plated RCA inputs, switchable bass boost, and a configurable crossover, it offers precise sound customization. Its MOSFET power supply ensures clean, distortion-free audio, while built-in thermal, overload, and short circuit protections guarantee durability and safety. Designed for easy installation with a slim profile, this amp is perfect for millennials seeking premium sound performance and reliability on the go.





| ASIN | B000CHRK6S |
| Best Sellers Rank | #13,390 in Electronics ( See Top 100 in Electronics ) #29 in Car Multichannel Amplifiers |
| Brand | Pyle |
| Brand Name | Pyle |
| Customer Reviews | 4.2 out of 5 stars 1,584 Reviews |
| Global Trade Identification Number | 00068888876971 |
| Included Components | Amplifier |
| Item Dimensions | 9.85 x 10.63 x 1.38 inches |
| Item Type Name | vehicle-multi-channel-amplifiers |
| Item Weight | 4.99 Pounds |
| Item dimensions L x W x H | 9.85 x 10.63 x 1.38 inches |
| Manufacturer | Pyle |
| Material Type | Gold |
| Maximum Output Power | 1400-watt |
| Model | PLA2200 |
| Mounting Type | Surface Mount |
| Number of Channels | 2 |
| Output Power | 1400 Watts |
| Package Type Name | Box |
| Part Number | PLA2200 |
| Specification Met | Thermal, Overload, Short Circuit Protection |
| UPC | 068888876971 |
| Unit Count | 1.0 Count |
| Warranty Description | Please contact the manufacturer |
E**.
Great little amp!
I bought this for my first car, and first set up. I did the install by myself, with a little help from the internet, of course (as well as installing the stereo) without really any prior knowledge. Once I got the cables all run throughout my car, it was as simple as just plugging it in and turning on my stereo. It drives my two little 600 watt 8"s just fine and with no overheating. I accidentally blew a fuse by not paying attention and reversing the 12v power and ground... hehe. The only time it overheated and kicked into protect mode was when I parked in the sun and forgot to put up my reflector (it's in the back windshield, bolted into the metal of the chassis of the back seat) and it baked in the sun all day (it's black, so it gets monster hot with direct 98 degree sun). A little AC and shade and she cooled right off. tl;dr Great amp for the price, prompt delivery, easy install even though I had no idea what I was doing. Drives my 8"s just fine.
A**T
Cheap power.
Works great slams a 12.
M**T
Power for price is amazing!
This amp is clean,easy to install and hammers!
N**8
Great Value!
I bought two of these amps to run 2 12" mtx Subs. If you use heavy gauge power and ground wires along with a good capacitor and quality speaker wire you will have a thumping system. I actually had these bridged AND running 2 ohm loads (friend hooked them up wrong). I didn't realize it until a week later, but they never overheated and thumped like no other. I ended up leaving them at 2ohms bridged cuz they worked so good. I'm not sure why I got away with those amps running such a low ohm bridged, but I'm guessing that 0 gauge power (with 1 farad cap) and 8 gauge speaker wires helped a bit. Oh and I did replace the 10amp fuses with 20 amps as soon as I got them out of the box (10amp fuses? I changed them so I wouldn't get laughed at.) I recently got some Alpine 10" Type-R subs and these amps will not push them, but if you are building a low budget system they work great. I paid $99 for the pair... GREAT VALUE!!!
S**.
Broke after first day of use
After I finally got around to having this amp installed, I was pleased as punch to having a little bass in my trunk. It sounded decent, for the price, and filled out the low end nicely. Unfortunately, the success was short-lived. After the first day (and literally less than 4 hours of use) the amp stopped working. I checked to see what had happened and the two 10-amp fuses on the amp were both blown. Perhaps I had the levels turned up too high, so I can claim responsibility for blowing the fuses (even though I'd think the built-in protection circuit would trip before the fuses blew - which it didn't). [Note: I'm using this amp with the Pyle 12" 600W sub, which you'd think would be a tested match]. So, I replaced the two fuses and expected to be back to normal. WRONG. Now when I turn on my radio with the volume on the lowest setting, the amp turns on for a second and then immediately goes into "protection mode" (the green light turns red). This means no sound from the amp. All of my other fuses are in-tact, but for some reason, the amp just won't stay out of protected mode. Given that it's broken so quickly, I'd say stay away.
J**A
Chopper Series Gotta Love It
Really Is A Good Amp Just Dont Push It
L**S
Plenty powerful
Great powerful amp, looks cool, sounds good, great value and price.
C**J
Gets hot fast
I liked the price which is why I'm sure ALOT of use bought this amp, When the amp hits it hits hard , but even with the gain turned down low and all the bass turned off at the deck , the amp will start to get hot after 4-5 songs and shut off to cool down, once it's cooled down your back to bass , that is until it gets hot again repeat process. I have the 1400x2 amp , on 2 fosgate 10s p3s The amp does not handle the base at all. I give it a 3 star because when it is cold it works great, it's price effective, however there is no longer car rides and enjoying your music loud with this amp
L**Y
Great looking amp.
Excellent great looking amp, works perfectly and pumps out volume just how I like it, LOUD! Very happy with this purchase
M**I
Three Stars
Not sure that the item should have silver screws and a photocopied manual???
M**G
amp
It was ok not happy that when you purchase this amp that if you are not satisfied you can not return it
Trustpilot
2 weeks ago
3 weeks ago