FREE

Description

The SKR V1.3 motoard uses a 32-bit LPC1768 Cortex-M3 series ARM class chip, with a main frequency of 100 MHz. Four-layer PCB, gold capture technology and are CE certification..
Equipped with the highly modular and open source firmware Marlin2.0 and smoothieware, it is suitable for users for DIY and secondary development and can avoid worries of not controlling the core code..
Support SPI working mode of the TMC2130 driver, stand-alone material detection function, TMC2130SPI can implement the limit switch function by changing the marine firmware without the use of an additional limit switch..
Reserved extended port SERVOS for PWM signals to support BL Touch; support 2.8" and 3.5" color touch screens, support 2004 LCD and 12864 LCD..
Support for power off, filament break detection, automatic shutdown after printing, and other functions..

1.Support warm bed power up to 144W The power of the warm bed connected to the motoard must be at least 144 W (ie the heat bed resistance is greater than 1 Ω), when a warm bed is used with high power , the external expansion card for the hot bed power supply must be connected. SKR Motoard Performance: After sw on the SKR motoard, the red light of the D4 lights up in the lower left corner indicating that the power supply is normal. The 5V SEL in the middle of the circuit board is the end of the power selection; 1) If you power the motoard via USB, connect the + 5V and USB pins with a short circuit cap. 2) When using a 12V-24V power supply, connect the + 5V and INT pins to the short circuit cap. Note: It can be connected to [12V-24V power supply] and [USB] at the same time. The printing process must use the short circuit cap to connect the pins + 5V and INT. The SKR motoard communicates with the computer: The SKR motoard communicates with the computer via the [USB] interface. After installing the driver, the motoard is inserted into the computer to detect the port for data transfer. It is easy to see that the computer does not recognize the USB port without installing the driver. 1.smoothieware-usb-driver-v1.1 driver installation (Windows systems only) The driver is available in our open source network (contact us to get the link) Note: When using smoothieware's open source firmware, the SKR board can only be detected at this time by the Windows system port because only Windows system drivers are used! ! ! 2. If you use the Marlin2.0 firmware, follow the installation instructions (please contact us to get the link).

Reviews

PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1

Fast Delivery to Japan

Easy Returns & Exchanges

Ask About This Product

Similar Products

› 3 D Printing And Scanning › 3 D Printer Parts And Accessories

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Japan. For more details, please visit our Support Page.

Frequently Asked Questions About PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 in Japan

Where can I buy PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 online at the best price in the Japan?

desertcart is the best online shopping platform where you can buy PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 available and ready for delivery in Japan?

desertcart ships the PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 to Tokyo, Osaka, Nagoya, Yokohama, Fukuokaand more cities in Japan. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 online?

desertcart buys PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 on desertcart?

Yes, it is absolutely safe to buy PoPprint SKR V1.3 32-bit ARM controller board with open source firmware Marlin2.0 and smoothieware Use the technology of gold capture technology TMC2130 TMC2208 DRV8825 A4988 3D printer driver, 1 from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.