104041 Access Series 16 Gauge AWG CL2 Rated 4 Conductor Speaker Wire/ Cable - 100ft Fire Safety In Wall Rated, Jacketed In White PVC material 99.9% Oxygen-Free Pure Bare Copper

I've used this speaker wire and ran it through my ceiling to drop down to rear and side channel speakers. It's not a job you want to do and later find out there is a wire problem. This wire worked perfectly and has continued to do so for a couple of years. Definitely a good buy!

well... it cable, but comparing to another brand that i have, this one feels soft and holds a nice round shape. The other one that i had had a dark gray jacket, wasn't soft but in the end they do the same thing. they hold 4 wires for speakers. I used about 50 feet this time around to hook up BlueTooth in my bathroom. the bathroom had speakers instealled previously, so i tapped into the existing speakers and works great. the wire was easy to run through the beams and walls. I made a home mad reeler to pull the wire. Home Depot and Lowes don't stock 16/4 or 18/4 for some reason, so i had to buy online.

This is excellent multi conductor speaker wire. It is much higher quality than the aluminum wire being stranded copper, and not much more expensive. I used this 4 conductor wire to connect my surround speakers. I liked that I only had to run 2 of these (surround and rear) to the back of my room instead of 4 normal 2 conductor wires. I used some Techflex Flexo 1/2 braided cable covers to group the two and make them look nicer. This wire is meant to run in wall, but I just ran it on the floor under my seating and used a UT Wire 5 foot Cord Protector (3 channel) to run where people walk ocassionally.

This cable is very flexible, easy to strip and tin the wires. However, the conductors appear to be smaller than 16 ga. Quality 16 ga wire strippers will not remove the insulation. I had to use the 18 ga setting on multiple tools to remove the insulation.

I measured the wire with very precise calipers and got between 14-15AWG. So the wire is definitely within rating. I needed individual colored wire pieces in 1ft lengths for a project. The plastic sheath was super easy to remove through the whole spool as it had a pull string inside. Untwisting the wires did take forever but that's expected from multiple conductor wire. Very satisfied.

I recently decided to rewire my a/v system, after purchasing the final two rear surround speakers for my 7.1 system. I have a large living room, and had to run wires to four speakers in or near the rear of my living room. This quad wire came in handy, because I was able to run just one long run for the two speakers farthest from the receiver. I then carefully split open the external sheathing, exposing the two wires I needed for the first speak on that run, then equally as carefully, I cut them away from the two remaining wires that would continue across the rear of the room to the final rear surround speaker. I used a short run of cable to slice onto the two exposed wires, and then ran that shorter section of wire to the first speaker on this run. It made connecting the two speakers easy and I only had to hide one wire from view instead of multiple ones. My Polk Audio speakers and Yahama receiver never sounded better!

This cable is good for a long run to a pair of speakers. I used it partially inside the wall and, at some places, running along a baseboard in a room. Either way, it's convenient to have to deal with only one cable per pair of speakers than to have to deal with two cables. The only issue is what to do when the cable reaches the speakers. You have two options: (1) separate the internal wires into two pairs and attach each pair with wire nuts to an ordinary speaker wire that runs to an individual speaker (left and right respectively); or (2) strip a few feet of insulation off the end of the cable and run the individual pairs directly to the individual speakers. Option 1 is useful when the speakers are far apart. Option 2 is nice because no wire nuts or splicing is required but will only be useful when the speakers are very close together (otherwise, if the speakers are far apart, running the loose pairs of wires without the external insulation will be messy).

Not much to say, it's a high quality 4-conductor cable at a good price. The PVC shield is durable and a little difficult to cut, but the extra durability makes me smile when pulling it through walls :) I've used the whole roll in my attic and walls and it's the best bang for the buck out there. The 16 AWG ensures that it can handle pretty much any audio signal you send through it with great detail and very little loss of power over long lengths.

Fantastic speaker cable makes my Hi-fi system sound great again. A very good buy!!

Great product to have and use, I don't use it for speaker wire, I have use it at 120 volt and low wattage products, and the price at the time was great, Thanks MJ

This is great value for a 4 conductor wire. Works great to move wire for a pair of speakers long distance. The copper appears to be nice quality. It strips nice and twists nice. 16ga is an ok size for most speakers.

excellent product at good price, I used it for exposed alarm cable

Good quality.